|
Product Details:
Payment & Shipping Terms:
|
1784-CP10 is the PLC-5 communication cable for the serial programming route, published as 1784-TD032.
The cable is documented in technical data 1784-TD032. Rockwell also lists it as the shielded serial cable to use with the PLC-5 flash tool when a processor is updated over the serial port.
| 1784-U2DN | USB to DeviceNet adapter, PCMCIA-era replacement | IN STOCK |
| 1784-U2CN | USB to ControlNet adapter cable | IN STOCK |
| 1784-SD2 | Industrial 2 GB Secure Digital card | IN STOCK |
| 1784-SD1 | Industrial 1 GB Secure Digital card | IN STOCK |
| 1784-PKTXD | DH+ / RIO / DH-485 dual channel PCI card | IN STOCK |
| 1784-PKTCS | ControlNet 1.5 PC card | IN STOCK |
| 1784-PCM6 | DH+ cable, 8-pin mini-DIN | IN STOCK |
| 1784-PCM5 | PLC-5 / PCMCIA DH+ cable | IN STOCK |
| 1784-PCM4 | DH-485 cable for SLC 5/01 to 5/03 | IN STOCK |
| 1784-PCM2 | PLC-2 cable for the PCMK card | IN STOCK |
| 1784-PCIDS | DeviceNet PCI scanner card | IN STOCK |
| 1784-PCICS | ControlNet PCI scanner card | IN STOCK |
| 1784-PCIC | ControlNet PCI card, redundant media | IN STOCK |
| 1784-PCD1 | DeviceNet PCMCIA interface cable | IN STOCK |
| 1784-PCC1 | ControlNet PCMCIA interface cable | IN STOCK |
| 1784-CP8 | 62-pin D-shell to 3-pin Phoenix adapter | IN STOCK |
| 1784-CP7 | CP / CP5 to PLC-5 DIN adapter | IN STOCK |
| 1784-CP6 | KT / KT2 / KL to PLC-5 cable, 3.05 m | IN STOCK |
| 1784-CP14 | DH-485 cable, Phoenix to RJ45, 3.2 m | IN STOCK |
| 1784-CP11 | PLC-5 serial programming cable | IN STOCK |
| 1784-CP10 | PLC-5 serial programming cable | IN STOCK |
| 1784-CP | PLC-3 communication cable | IN STOCK |
Catalog number |
1784-CP10 |
Product type |
PLC-5 communication cable |
Lifecycle status |
Discontinued December 31, 2019 |
Replacement category |
No planned RA replacement |
UPC |
612598120826 |
Used for |
Serial programming of PLC-5 processors |
Country of origin |
United States of America |
Warranty |
1 year |
Publication |
1784-TD032 |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1784-TD032 (module specifications) and 1784-TD032 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
1784-CP10 is the PLC-5 communication cable for the serial programming route, published as 1784-TD032.
It belongs to the same serial family as the CP11: the difference is the computer port it mates with, which is why both catalog numbers still appear in PLC-5 programming tables.
Because the flash tool loads firmware, the cable's shielding matters more here than on a programming lead: a noisy link during a flash is a bricked processor.
Discontinued December 31, 2019 and no planned Rockwell replacement — one of the harsher withdrawals in this bulletin.
The wiring is published, so a replacement can be built; what cannot be bought is the original assembly.
Programming and firmware flashing of PLC-5 processors over the serial port, including the flash tool route Rockwell documents.
Service work on processors where channel 0 is the only reliable connection.
Confirm the cable is the shielded serial type and check continuity end to end; for flashing work, do not substitute an unshielded lead.
Inspect the D-shell pins — a bent pin on a 25-pin connector is easy to miss and produces intermittent failures.
What does 1784-CP10 connect?
1784-CP10 is the PLC-5 communication cable for the serial programming route, published as 1784-TD032.
Is 1784-CP10 still available from Rockwell?
No. Discontinued December 31, 2019, with no planned Rockwell replacement.
What replaces 1784-CP10?
No planned Rockwell replacement is named; the wiring is published in 1784-TD032 for an equivalent lead.
Where does 1784-CP10 sit in the system?
Programming and firmware flashing of PLC-5 processors over the serial port, including the flash tool route Rockwell documents.
What should I check before buying 1784-CP10?
Shielding, continuity and the D-shell pins.