|
Product Details:
Payment & Shipping Terms:
|
1784-CP is the PLC-3 communication cable — the original member of the CP family, from the era when a programming terminal was a desktop with an interface card in a slot.
The cable is documented in 1784-TD026, which lists the card and cable combinations: 1784-KTK1 with CP5 and CP7, 1784-KT with CP6 or CP plus CP7.
| 1784-U2DN | USB to DeviceNet adapter, PCMCIA-era replacement | IN STOCK |
| 1784-U2CN | USB to ControlNet adapter cable | IN STOCK |
| 1784-SD2 | Industrial 2 GB Secure Digital card | IN STOCK |
| 1784-SD1 | Industrial 1 GB Secure Digital card | IN STOCK |
| 1784-PKTXD | DH+ / RIO / DH-485 dual channel PCI card | IN STOCK |
| 1784-PKTCS | ControlNet 1.5 PC card | IN STOCK |
| 1784-PCM6 | DH+ cable, 8-pin mini-DIN | IN STOCK |
| 1784-PCM5 | PLC-5 / PCMCIA DH+ cable | IN STOCK |
| 1784-PCM4 | DH-485 cable for SLC 5/01 to 5/03 | IN STOCK |
| 1784-PCM2 | PLC-2 cable for the PCMK card | IN STOCK |
| 1784-PCIDS | DeviceNet PCI scanner card | IN STOCK |
| 1784-PCICS | ControlNet PCI scanner card | IN STOCK |
| 1784-PCIC | ControlNet PCI card, redundant media | IN STOCK |
| 1784-PCD1 | DeviceNet PCMCIA interface cable | IN STOCK |
| 1784-PCC1 | ControlNet PCMCIA interface cable | IN STOCK |
| 1784-CP8 | 62-pin D-shell to 3-pin Phoenix adapter | IN STOCK |
| 1784-CP7 | CP / CP5 to PLC-5 DIN adapter | IN STOCK |
| 1784-CP6 | KT / KT2 / KL to PLC-5 cable, 3.05 m | IN STOCK |
| 1784-CP14 | DH-485 cable, Phoenix to RJ45, 3.2 m | IN STOCK |
| 1784-CP11 | PLC-5 serial programming cable | IN STOCK |
| 1784-CP10 | PLC-5 serial programming cable | IN STOCK |
| 1784-CP | PLC-3 communication cable | IN STOCK |
Catalog number |
1784-CP |
Product type |
PLC-3 communication cable |
Lifecycle status |
Discontinued May 25, 2017 |
Replacement category |
Engineering Replacement |
Country of origin |
United States of America |
Warranty |
1 year |
Used with |
1784-KT and 1784-KTK1 interface cards, with 1784-CP7 for PLC-5 |
Publication |
1784-TD026 |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1784-TD026 (module specifications) and 1784-TD026 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
1784-CP is the PLC-3 communication cable — the original member of the CP family, from the era when a programming terminal was a desktop with an interface card in a slot.
Its second life is on PLC-5: combined with the 1784-CP7 adapter it reaches enhanced processors, which is why the two parts are usually found together.
So CP is not a stand-alone route to a PLC-5 DH+ port; it needs the CP7 adapter for the mini-DIN connection unless the processor end is the older connector.
Discontinued May 25, 2017, replacement category Engineering Replacement — the earliest withdrawal of the CP cables in this bulletin.
PLC-3 controllers themselves are museum pieces in most plants, so the practical demand is for PLC-5 kits that were built around this cable.
PLC-3 programming where a controller is still in service, and PLC-5 programming through CP plus CP7.
Completing a legacy kit whose cable is present but whose adapter has been lost.
Check the D-shell and the cable jacket for cracks; a 1990s assembly that has been coiled in a cabinet for decades fails at the connector first.
Confirm the intended use — PLC-3 direct, or PLC-5 through the CP7 adapter — before buying, since the adapter is a separate part.
What does 1784-CP connect?
1784-CP is the PLC-3 communication cable — the original member of the CP family, from the era when a programming terminal was a desktop with an interface card in a slot.
Is 1784-CP still available from Rockwell?
No. Discontinued May 25, 2017; replacement category Engineering Replacement.
What replaces 1784-CP?
Rockwell names no stocked successor; support is case by case.
Where does 1784-CP sit in the system?
PLC-3 programming where a controller is still in service, and PLC-5 programming through CP plus CP7.
What should I check before buying 1784-CP?
The D-shell pins, the jacket, and whether a CP7 adapter is needed.