|
Product Details:
Payment & Shipping Terms:
|
1783-ETAP2F is an EtherNet/IP tap: a small device that lets several nodes join a device-level ring without a switch, and that keeps that ring intact when a node is unplugged.
It is what makes a line-level ring practical — the tap owns the ring ports, so the controller needs only one Ethernet connection.
| 1783-BMS20CL | Stratix 5700, 20 ports, 16 copper + 2 combo + 2 SFP | IN STOCK |
| 1783-BMS20CGP | Stratix 5700, 20 ports, gigabit combo | IN STOCK |
| 1783-BMS20CGL | Stratix 5700, 20 ports, gigabit combo, Lite firmware | IN STOCK |
| 1783-BMS20CGPK | Stratix 5700, 20 ports, gigabit combo, kit | IN STOCK |
| 1783-BMS06TA | Stratix 5700, 6 copper ports | IN STOCK |
| 1783-BMS06TL | Stratix 5700, 6 copper ports, Lite firmware | IN STOCK |
| 1783-BMS06TGA | Stratix 5700, 4 copper + 2 gigabit copper | IN STOCK |
| 1783-BMS06SA | Stratix 5700, 4 copper + 2 SFP | IN STOCK |
| 1783-BMS06SL | Stratix 5700, 4 copper + 2 SFP, Lite firmware | IN STOCK |
| 1783-BMS06SGA | Stratix 5700, 4 copper + 2 gigabit SFP | IN STOCK |
| 1783-BMS06SGL | Stratix 5700, 4 copper + 2 gigabit SFP, Lite firmware | IN STOCK |
| 1783-MS06T | Stratix 8000, 6 port chassis | IN STOCK |
| 1783-MS10T | Stratix 8000, 10 port chassis | IN STOCK |
| 1783-RMS06T | Stratix 8300, 6 port layer 3 | IN STOCK |
| 1783-RMS10T | Stratix 8300, 10 port layer 3 | IN STOCK |
| 1783-EMS04T | Stratix 6000, 4 port managed | IN STOCK |
| 1783-MX08T | Stratix 8000 copper 8 port expansion | IN STOCK |
| 1783-MX08F | Stratix 8000 fibre 8 port expansion | IN STOCK |
| 1783-MCF | Stratix 8000 CompactFlash spare card | IN STOCK |
| 1783-RMCF | Stratix 8300 CompactFlash spare card | IN STOCK |
| 1783-ETAP | EtherNet/IP tap, 3 copper ports | IN STOCK |
| 1783-ETAP2F | EtherNet/IP tap, 1 copper + 2 fibre | IN STOCK |
| 1783-SFP100FX | 100FX multimode SFP, 2 km | IN STOCK |
| 1783-SFP100LX | 100LX singlemode SFP, 10 km | IN STOCK |
| 1783-SFP1GSX | 1000SX multimode SFP, 550 m | IN STOCK |
| 1783-SFP1GLX | 1000LX singlemode SFP, 10 km | IN STOCK |
| 1783-US8T | Stratix 2000, 8 copper ports, unmanaged | IN STOCK |
| 1783-US03T01F | Stratix 2000, 3 copper + 1 fibre, unmanaged | IN STOCK |
Catalog number |
1783-ETAP2F |
Description |
EtherNet/IP tap |
Ports |
1 copper port plus 2 fibre ports |
Interface |
1 * copper RJ45, 2 * fibre |
Power supply |
24V dc |
Lifecycle status |
Discontinued August 31, 2026 |
Replacement category |
Engineering Replacement |
Replacement product |
1783-ETAP1T2SFP |
Country of origin |
United States |
Publication |
1783-UM011 |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1783-UM011 (module specifications) and 1783-SG001 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
1 copper port plus 2 fibre ports, powered from 24V dc.
In a device-level ring (DLR) the tap sits between the two ring ports and presents one copper port to the device. Losing the device does not break the ring; losing the tap does.
Where the controller has a single Ethernet port and the topology has to survive a cable break — a conveyor line, a packaging machine, a process skid.
Where a managed switch would be overkill: a tap has no management, no addressing plan and nothing to configure.
1783-ETAP is three copper ports; 1783-ETAP2F is one copper port plus two fibre ports for a ring that crosses between cabinets.
Fibre on the ring is what makes the distance work. Copper taps stop at the enclosure wall for practical reasons, not because the standard forbids more.
Discontinued August 31, 2026, replacement category Engineering Replacement, replacement product 1783-ETAP1T2SFP.
Taps are overlooked in spares planning because they look passive. A line with ten taps and no spare stops at the first failed tap.
Check the ports for bent pins and confirm which variant the unit is — copper and fibre taps look similar from the front.
Country of origin for this catalog number is the United States, which matters for lead time on any remaining new stock.
What is 1783-ETAP2F?
An EtherNet/IP tap — 1 copper port plus 2 fibre ports.
What power does 1783-ETAP2F need?
24V dc.
Is 1783-ETAP2F still available from Rockwell?
No. Discontinued August 31, 2026; replacement category Engineering Replacement.
What replaces 1783-ETAP2F?
1783-ETAP1T2SFP
Where is 1783-ETAP2F used?
In device-level rings, to keep the ring intact when a device is disconnected.