|
Product Details:
Payment & Shipping Terms:
|
1771-IQ16K is a 1771 input module for the 1771 I/O chassis used by PLC-5 and PLC-2 processors. A catalog variant of the 16-point isolated 24 V DC input; Rockwell has withdrawn the page for the exact number.
Field connections land on the 1771-WA wiring arm, the 10-terminal arm that swings up to the module so the arm can stay wired while the module is swapped.
Catalog number |
1771-IQ16K |
Product type |
1771 input module |
Number of inputs |
Not published |
Input signal |
Not published |
Module series |
Not published |
1771 chassis compatibility |
Not published |
Lifecycle status |
Discontinued |
Discontinued date |
Not published |
Replacement category |
Not published |
UPC |
Not published |
Country of origin |
Not published |
Field wiring arm |
1771-WA, 10 terminal |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications Rockwell literature library (module specifications) and 1785-SG001 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
1771-IQ16K is a 1771 input module for the 1771 I/O chassis used by PLC-5 and PLC-2 processors. A catalog variant of the 16-point isolated 24 V DC input; Rockwell has withdrawn the page for the exact number.
The slot it occupies is one 1771 slot, and the input image it claims is fixed by the module series: Not published. That number decides how much of the processor input table the rack consumes, not how many wires the panel brings in.
Signal level is Not published. Nothing in the module is software configurable, so the field device has to match the printed range before the module is ordered.
Field connections land on the 1771-WA wiring arm, the 10-terminal arm that swings up to the module so the arm can stay wired while the module is swapped.
Keying bands in the chassis connector must line up with the slots on the module board. 1771 chassis are keyed per module type precisely so a 120 V AC module cannot be pushed into a slot wired for a 24 V DC module.
Backplane current comes from the chassis supply, so the load of every module in the rack has to be added up before a rack is repopulated with these cards.
The page keeps to the 1771 mechanics and leaves point count and range to the label, since the variant is what changes between order numbers.
Chassis compatibility is published per module series: Not published. Series A modules fit the superseded 1771-A1, -A2 and -A4 chassis as well as the current A1B to A4B and AM1/AM2 chassis.
Some 32-point and isolated cards can only be placed under 1-slot or 2-slot addressing rules, so the addressing mode of the chassis has to be confirmed before a mixed rack is built.
Rockwell lists 1771-IQ16K as Discontinued, replacement category Not published.
The published discontinued date is Not published.
The family replacement path is a 1756 or 1794 migration, which means the field wiring, the wiring arms and the addressing scheme all change. Buying the same catalog number is usually cheaper than re-terminating a panel.
Ask for a photo of the label side and the wiring arm. A module removed without its arm has to be re-keyed and re-wired, which is where most of the cost of a used card actually sits.
Check the module series letter against the chassis series: an A-series card in an A1B chassis works, but the reverse combination is what produces "module not recognised" faults.
These are static-sensitive cards. A unit shipped loose without conductive foam is a risk, whatever the price.
How many inputs does 1771-IQ16K have?
Not published, on the published 1771 data sheet.
What input signal does 1771-IQ16K accept?
Not published.
Which 1771 chassis will accept 1771-IQ16K?
Not published.
Is 1771-IQ16K still available from Rockwell?
No. It is listed as Discontinued with replacement category Not published.
What is the discontinued date of 1771-IQ16K?
Not published.