|
Product Details:
Payment & Shipping Terms:
|
The 1756-IA8D (also written 1756IA8D) is the 8-point AC input module: 120 V AC at 50/60 Hz, 16 mA per point, backplane 100 mA at 5.1 V DC and 3 mA at 24 V DC, isolation 125 V continuous basic, inputs to backplane, with no isolation between individual inputs (1756-IN064).
The input current is the number that matters on this module. At 16 mA it draws more per point than any other 120 V AC input in the family — the IA16 and IA16I publish 13 mA and 15 mA — and that current is what makes a 120 V input immune to leakage from long field runs, to snubbers across a contactor coil, and to the off-state leakage of solid-state sensors nearby on the same panel.
The isolation arrangement is the limitation. All eight inputs share a common with no isolation between them, and the barrier to the backplane is 125 V basic rather than the 250 V published on the IA16 and IA32. Eight points from one 120 V feed is the intended wiring; eight points from eight different circuits is not.
The module sits in a single 1756 chassis slot and is configured in the Studio 5000 project like the rest of the family, with per-point filtering selected in the module properties rather than by a hardware switch. The 3 mA draw at 24 V DC is the highest of the AC input modules and is worth counting in a chassis with many I/O cards.
1756-IB16 | 16 sinking inputs, 10...31.2 V DC 10 mA, backplane 100 mA, UPC 612598171293 | In stock |
1756-IB16D | 16 diagnostic inputs, 10...30 V DC 13 mA, backplane 150 mA | In stock |
1756-IB16I | 16 isolated inputs, 10...30 V DC 10 mA, backplane 135 mA | In stock |
1756-IB16IF | 16 fast peer-control inputs, 10...30 V DC 5 mA, backplane 275 mA | In stock |
1756-IB16ISOE | 16 sequence-of-events inputs, 10...55 V DC 5.1 mA, backplane 320 mA | In stock |
1756-IB32 | 32 sinking inputs, 10...31.2 V DC 5.5 mA, backplane 120 mA, UPC 612598171309 | In stock |
1756-IC16 | 16 inputs, 30...60 V DC, backplane per 1756-IN062 | In stock |
1756-IG16 | 16 TTL inputs, backplane per 1756-IN062 | In stock |
1756-IV16 | 16 inputs, 48 V DC, backplane per 1756-IN062 | In stock |
Application | Discrete input |
Brand Name | Rockwell (Rockwell) |
Cat Num | 1756-IA8D |
Communication | Backplane (producer/consumer) |
Display | — |
Enclosure | None (open-style) |
Interface | Removable terminal block |
Mounting | Chassis slot |
Number Of Channels | 8 |
Standard | CE, UL, CSA, RCM |
Sub Brand | ControlLogix |
Type | Digital Input Module |
UNSPSC | — |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1756-TD003 (module specifications) and 1756-IN062 (DC digital I/O installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
The IA8D suits a small, self-contained 120 V AC pilot circuit — a handful of float switches, pressure switches or pushbuttons on one machine section, all fed from the same control transformer.
It is also the module to reach for when the field wiring is long and noisy. The 16 mA input current holds off leakage that would false-trigger a lighter module, and the cost is eight points per slot and a shared common.
Where more than eight 120 V signals are needed from one feed, the IA16 gives sixteen points at the same 100 mA backplane current, which is the more economical arrangement once the panel grows past eight signals.
Three bi-colour indicators plus the alphanumeric display cover almost every commissioning fault, so most problems are resolved at the panel without a laptop.
| Indicator | State | Meaning and first action |
| Check 2 | 125 V barrier, not 250 V | Inputs-to-backplane is 125 V basic on the IA8D; the IA16 and IA32 publish 250 V. At 120 V nominal that is adequate, and it is not a 240 V module. |
| Check 3 | 16 mA per point | The highest input current in the 120 V family, which buys leakage immunity but loads the field circuit more heavily than the 13 mA modules. |
| Check 4 | 8 points per slot | Half the density of the IA16 at the same backplane current — the trade is wiring simplicity against slot count. |
| Check 5 | Temperature code T4A | 120 °C maximum surface temperature under the North American classification published in 1756-IN064. |
Specifications per Rockwell publication 1756-IN062 (ControlLogix DC Digital I/O Modules installation instructions); module behaviour per 1756-UM058 and technical data 1756-TD002 and 1756-IN050.
For 16 points at 120 V AC with two isolated groups of eight, use 1756-IA16.
For 16 individually isolated 120 V AC inputs, use 1756-IA16I.
For 240 V AC signals, 1756-IM16I is the published option.
What is the 1756-IA8D?
An 8-point 120 V AC input module, 16 mA per point, backplane 100 mA at 5.1 V DC and 3 mA at 24 V DC.
What input voltage does it accept?
120 V AC at 50/60 Hz, as published in 1756-IN064.
How much current does each input draw?
16 mA at 120 V AC — the highest of the 120 V AC input modules in the family.
Does it isolate the inputs from each other?
No. All eight inputs share a common, with 125 V continuous basic isolation to the backplane only.
Can I use it on 240 V AC?
No. The isolation to the backplane is 125 V on this module, and the published input voltage is 120 V AC. Use 1756-IM16I for 240 V.
How much backplane current does it take?
100 mA at 5.1 V DC and 3 mA at 24 V DC.
What wire size fits the terminal block?
0.33...2.1 mm² (22...14 AWG) copper rated 90 °C or better, with 1.2 mm maximum insulation.
What is its temperature code?
T4A under the North American classification in 1756-IN064, with 60 °C maximum surrounding air.
Which document covers it?
1756-IN064, the installation instructions for the ControlLogix AC digital I/O modules.
Data sources. Technical values on this page come from Rockwell publications 1756-TD003 (ControlLogix Communication Modules Specifications), 1756-IN050 (1756 EtherNet/IP Communication Modules, installation instructions), 1756-UM004 (ControlLogix EtherNet/IP Network Devices User Manual) and the manufacturer's product page for 1756-IA8D. Values re-checked 15 November 2026.