|
Product Details:
Payment & Shipping Terms:
|
The 1756-OF4 (also written 1756OF4) is the ControlLogix 4-channel analog output module: four voltage or current outputs on ±10 V DC and 0…20 mA, with 15-bit resolution across 10.5 V (320 µV/bit) and 16-bit across 21 mA (325 nA/bit).
Two hardware series exist and they are not electrically identical. Series A draws 150 mA at 5.1 V and 120 mA at 24 V; series B draws up to 200 mA and 155 mA. Both figures are published and both appear on the module nameplate.
| 1756-EN2F | CLX HI CAP EIP MOD - FBR | IN STOCK |
| 1756-EN2T | ControlLogix Hi Capacity ENET/IP | IN STOCK |
| 1756-EN2TR | 2-PORT CLX HI-CAP ENET/IP MODULE - TP | IN STOCK |
| 1756-EN2TRXT | CLX ENET/IP Module - 2TP -X Envt | IN STOCK |
| 1756-EN2TSC | EtherNet/IP Hi Prof Sngl Port VPN Bridge | IN STOCK |
| 1756-EN2TXT | CLX ENET/IP MODULE - TP, X-ENVT | IN STOCK |
| 1756-EN3TR | ControlLogix Ethernet Motion Module | IN STOCK |
| 1756-ENBT | ControlLogix Communication Module | IN STOCK |
| 1756-EWEB | ControlLogix Web Server Module | IN STOCK |
| 1756-EXT | ControlLogix Backplane Extender | IN STOCK |
| 1756-HIST1G | Historian ME 1 Gig in ControlLogix Rack | IN STOCK |
| 1756-HIST2G | Historian ME 2 Gig in ControlLogix Rack | IN STOCK |
| 1756-HSC | ControlLogix High-Speed Counter Module | IN STOCK |
| 1756-HYD02 | ControlLogix Analog Combination Module | IN STOCK |
Application |
Analog output module |
Brand Name |
Rockwell (Rockwell) |
Cat Num |
1756-OF4 |
Outputs |
4 voltage or current |
Output Range |
±10 V DC; 0…20 mA |
Resolution |
15 bits across 10.5 V = 320 µV/bit; 16 bits across 21 mA = 325 nA/bit |
Backplane Current, Series A |
150 mA @ 5.1 V; 120 mA @ 24 V |
Backplane Current, Series B |
200 mA max @ 5.1 V; 155 mA max @ 24 V |
Backplane Power |
3.7 W (series A); 4.74 W max (series B) |
Power Dissipation |
3.7 W at 0…750 Ω (series A); 4.74…1.74 W (series B) |
Thermal Dissipation |
10.91 BTU/hr (series A); 16.17 BTU/hr (series B) |
Isolation |
None between channels (single-ended) |
Overvoltage Protection |
24 V DC |
Open Circuit Detection |
Current mode only, output must be set above 0.1 mA |
Terminal Block |
1756-TBNH or 1756-TBSH, 20-position |
RTB Torque |
0.8…1 N·m (7…9 lb·in) |
Wire Size |
#22…14 AWG (0.324…2.08 mm²), 1.2 mm insulation max |
Slot Width |
1 |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1756-TD003 (module specifications) and 1756-IN050 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
The series difference is the first thing to check on a replacement. Series A total backplane power is 3.7 W with 10.91 BTU/hr dissipation; series B is 4.74 W with 16.17 BTU/hr. In a chassis already close to its supply limit, a series B module in a slot budgeted for series A is the difference between running and browning out.
There is no isolation between channels — the module is single-ended. Four loops share a reference, and a grounded transducer on one channel introduces an error on the others. Where that matters, the 6-channel isolated modules (OF6VI, OF6CI) or the 8-channel OF8I are the alternatives.
Open circuit detection exists but is conditional: it applies to current mode only, and the output must be commanded above 0.1 mA for the diagnostic to report anything. A loop configured at 0 mA has no useful open-circuit indication, which is a common commissioning surprise.
Field wiring is through a 20-position removable terminal block, 1756-TBNH or 1756-TBSH. The block is not included with the module. RTB keying is user defined on this module, so a block keyed for another module family will not seat properly and the module will not appear in the chassis.
Terminations are specified in the installation instructions: 0.8…1 N·m (7…9 lb·in) on the screw block, conductors #22…14 AWG (0.324…2.08 mm²), and no more than 1.2 mm of insulation stripped. These are tighter than the general ControlLogix ranges used on the 16- and 32-point digital families.
Output range is ±10 V or 0…20 mA, with overvoltage protection to 24 V DC. Because the resolution figures differ between the two modes, the effective step size depends on which mode the channel is configured for — 320 µV in voltage mode, 325 nA in current mode.
This module reports module health and calibration state only; an open circuit needs current mode above 0.1 mA, and channel-to-channel errors are not flagged because there is no isolation between them.
| Indicator | State | Meaning and first action |
| Channel reads a fixed offset after a module swap | — | Series A and B are electrically different: 150 mA versus 200 mA on 5.1 V and 3.7 W versus 4.74 W total backplane power. A chassis sized for one may not supply the other. |
| Output drifts between channels | — | There is no isolation between channels on this module; a shared return path carries the error across all four. |
| Module does not appear in the chassis after insertion | — | RTB keying is user defined on the 20-position block; a block keyed for another module type will not seat correctly. |
Resolution, backplane current, dissipation and isolation per Rockwell publication 1756-TD002-EN-E; RTB torque and wire size per 1756-IN016 and 1756-IN050.
Check the hardware series on the old module before ordering the replacement; series A and B differ in backplane current and power.
Carry the 20-position RTB over or fit a new TBNH/TBSH, and re-key it for the module.
Re-verify the current-mode channels are above 0.1 mA if open circuit detection was relied on.
What is the 1756-OF4?
A ControlLogix 4-channel analog output module with four voltage or current outputs.
What are the output ranges?
±10 V DC and 0…20 mA.
What resolution does it offer?
15 bits across 10.5 V (320 µV/bit) in voltage mode and 16 bits across 21 mA (325 nA/bit) in current mode.
What is the difference between series A and series B?
Backplane current and power: series A draws 150 mA at 5.1 V and 120 mA at 24 V with 3.7 W; series B draws up to 200 mA and 155 mA with 4.74 W.
Are the channels isolated from each other?
No, there is no isolation between channels.
Which terminal block does it use?
A 20-position 1756-TBNH or 1756-TBSH, not supplied with the module.
What torque should the RTB screws be set to?
0.8…1 N·m (7…9 lb·in).
When does open circuit detection work?
In current mode only, with the output set above 0.1 mA.
What wire size fits the terminal block?
#22…14 AWG (0.324…2.08 mm²), 1.2 mm insulation maximum.
How much heat does it dissipate?
10.91 BTU/hr for series A, 16.17 BTU/hr for series B.
Data sources. Technical values on this page come from Rockwell publications 1756-TD002 (ControlLogix I/O Modules Specifications) - OF4 series A and series B electrical tables; 1756-IN016 (ControlLogix Voltage/Current Output Module 1756-OF4 installation instructions) - RTB torque, wire size, keying and the manufacturer's product page for 1756-OF4. Values re-checked 16 November 2026.