|
Product Details:
Payment & Shipping Terms:
|
The 1756-RM is the first-generation ControlLogix redundancy module. It links the redundant chassis pair over a single fiber channel and synchronises the two controllers.
It is specified for 0…60 °C and pairs only with another module of the same catalog number, in the same slot of the other chassis.
| 1756-EN2F | CLX HI CAP EIP MOD - FBR | IN STOCK |
| 1756-EN2T | ControlLogix Hi Capacity ENET/IP | IN STOCK |
| 1756-EN2TR | 2-PORT CLX HI-CAP ENET/IP MODULE - TP | IN STOCK |
| 1756-EN2TRXT | CLX ENET/IP Module - 2TP -X Envt | IN STOCK |
| 1756-EN2TSC | EtherNet/IP Hi Prof Sngl Port VPN Bridge | IN STOCK |
| 1756-EN2TXT | CLX ENET/IP MODULE - TP, X-ENVT | IN STOCK |
| 1756-EN3TR | ControlLogix Ethernet Motion Module | IN STOCK |
| 1756-ENBT | ControlLogix Communication Module | IN STOCK |
| 1756-EWEB | ControlLogix Web Server Module | IN STOCK |
| 1756-EXT | ControlLogix Backplane Extender | IN STOCK |
| 1756-HIST1G | Historian ME 1 Gig in ControlLogix Rack | IN STOCK |
| 1756-HIST2G | Historian ME 2 Gig in ControlLogix Rack | IN STOCK |
| 1756-HSC | ControlLogix High-Speed Counter Module | IN STOCK |
| 1756-HYD02 | ControlLogix Analog Combination Module | IN STOCK |
Application |
Redundancy module |
Brand Name |
Rockwell (Rockwell) |
Cat Num |
1756-RM (Series A and Series B) |
Function |
Links the redundant chassis pair and synchronises the two controllers |
Channels |
1 (transmit and receive fiber) |
Connector Type |
LC-PC (fiber-optic) |
Cable Type |
8.5/125 µm single-mode fiber-optic cable |
Wavelength |
1300 nm |
Length, max |
4 km (4000 m) |
Transmission |
100 Mbps or less |
SFP Transceiver |
None - the transceiver is built into the module |
Operating Temperature |
0…60 °C (32…140 °F) |
Backplane Power |
Not published for 1756-RM/A and 1756-RM/B in 1756-UM535 |
Partner Module |
Must be the same catalog number, in the same slot of each chassis |
Mixing Rule |
Cannot be mixed with 1756-RM2 or 1756-RM2XT |
Firmware Bundles |
Redundancy bundles 24.052 and later support only 1756-RM2 / RM2XT |
Quantity |
1 per chassis, maximum |
Publication |
1756-UM535 (ControlLogix Redundancy Systems) |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1756-TD003 (module specifications) and 1756-IN050 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
A redundancy pair is not a spare-parts arrangement; it is two modules working as one link. Each redundant chassis carries exactly one redundancy module, in the same slot in both chassis, and the two modules must carry the same catalog number. Rockwell states this as a requirement rather than a recommendation: a partner module with a different number is not supported.
The fiber link is one channel, transmit and receive, over 8.5/125 µm single-mode cable with an LC-PC connector. The published maximum is 4 km at 1300 nm, with the transceiver built into the module rather than supplied as an SFP. That is the practical difference from the RM2 generation, which uses a Rockwell PN-91972 SFP and reaches 10 km with 1000BASE-LX optics.
Speed is where the two generations separate cleanly. The RM/A pair and the RM/B pair each run at up to 100 Mbps, and the pairs must match: RM/A with RM/A, RM/B with RM/B. An RM2 pair runs at 1000 Mbps. The crossload time follows suit, and the formulas are published per module: for RM/A it is DINTs * 0.00091 + 0.6 ms, for RM/B DINTs * 0.00043 + 0.3 ms, and for RM2 DINTs * 0.000550 + 0.39 ms. At 1000 DINTs that is 1.51 ms, 0.73 ms and 0.94 ms respectively — the RM/B pair is actually the fastest of the three, which is why B-series modules still turn up in working plants.
Firmware is the constraint that decides whether this module is usable at all. Redundancy bundles version 24.052 and later support only the 1756-RM2 and 1756-RM2XT. The firmware inside the bundle is written for RM, RM2, RMXT and RM2XT, but the bundle itself will not serve an RM pair beyond that revision. Before purchasing a first-generation module, the installed bundle version decides the answer, not the module's condition.
Mixing is not allowed in either direction. RM2 and RM2XT modules work only with each other, and cannot be paired with RM/A, RM/B or RMXT. A plant that upgrades one chassis and not the other ends up with two modules that cannot talk.
The extended-temperature variant is a separate catalog number, not a rating option on this one. Where the enclosure runs cold, the RMXT is the only member of the first generation that is specified below 0 °C.
Power figures for the RM/A and RM/B are not published in 1756-UM535, so this page does not quote them. The RM2 figure — 1.16 A at 5.1 V DC plus 3.4 mA at 24 V DC — belongs to the RM2 module and is not transferable, in the same way that the RM2's 1000 Mbps and 10 km figures are not.
The module has no alphanumeric display; pairing, bundle revision and fiber continuity are the three things a commissioning check must confirm.
| Indicator | State | Meaning and first action |
| No indicator on either module | — | Off means no power is applied to the redundancy module, not a lost fiber link. |
| Partner mismatch after a module swap | — | A partner module must carry the same catalog number; mixing RM/A with RM/B, or RM with RM2, is not supported. |
Facts on this page come only from the Rockwell publications named above; anything they do not state is marked as not published and 1756-IN050.
Replace with a module of the same catalog number, or plan the whole pair for RM2 at the same time.
Check the firmware bundle revision before ordering; a late bundle cannot run this module.
Keep the slot assignment unchanged so the partner mapping survives the swap.
What is the 1756-RM?
The first-generation ControlLogix redundancy module, linking the redundant chassis pair over one fiber channel.
What speed does it run?
Up to 100 Mbps; RM/A pairs with RM/A and RM/B pairs with RM/B.
How far can the fiber run?
4 km on 8.5/125 µm single-mode cable.
Can it be mixed with 1756-RM2?
No, RM2 and RM2XT work only with each other.
Which firmware bundles support it?
Bundles before 24.052; from 24.052 onward only RM2 and RM2XT are supported.
How many modules per chassis?
One, in the same slot in both chassis of the pair.
What does a red indicator mean?
Steady red is the power-up self-test, or a major shutdown fault if it persists.
What is its backplane power draw?
Not published for RM/A and RM/B in 1756-UM535.
Data sources. Technical values on this page come from Rockwell publications 1756-UM535 (ControlLogix Redundancy Systems) - speed, distance, cable, connector, temperature, pairing and firmware bundle rules; 1756-IN087 for the RM2 contrast figures and the manufacturer's product page for 1756-RM. Values re-checked 16 November 2026.