|
Product Details:
Payment & Shipping Terms:
|
The 1756-IV32 (also written 1756IV32) is the 32-point DC input module with input-to-input isolation: 10...30 V DC, 1.5...5 mA per pin, backplane load 175 mA at 5.1 V DC and 2 mA at 24 V DC (1756-IN062).
Isolation is the point of this module: 250 V continuous reinforced inputs-to-backplane plus 250 V basic input-to-input. That is stronger on both axes than the 1756-IV16, which has basic isolation to the backplane and no isolation within a group. Thirty-two points where every channel is separated from every other channel, in one slot.
The per-pin current window, 1.5...5 mA, is half the range of the 16-point IV16. Higher density means a narrower current window per channel, which is the trade for fitting 32 isolated channels in one slot for 175 mA of backplane.
Published details from 1756-IN062: 0...60 °C operating, open-style enclosure, removable terminal block as a separate item, and conductor category 1 routing for field wiring.
1756-IB16 | 16 sinking inputs, 10...31.2 V DC 10 mA, backplane 100 mA, UPC 612598171293 | In stock |
1756-IB16D | 16 diagnostic inputs, 10...30 V DC 13 mA, backplane 150 mA | In stock |
1756-IB16I | 16 isolated inputs, 10...30 V DC 10 mA, backplane 135 mA | In stock |
1756-IB16IF | 16 fast peer-control inputs, 10...30 V DC 5 mA, backplane 275 mA | In stock |
1756-IB16ISOE | 16 sequence-of-events inputs, 10...55 V DC 5.1 mA, backplane 320 mA | In stock |
1756-IB32 | 32 sinking inputs, 10...31.2 V DC 5.5 mA, backplane 120 mA, UPC 612598171309 | In stock |
1756-IC16 | 16 inputs, 30...60 V DC, backplane per 1756-IN062 | In stock |
1756-IG16 | 16 TTL inputs, backplane per 1756-IN062 | In stock |
1756-IV16 | 16 inputs, 48 V DC, backplane per 1756-IN062 | In stock |
Application | Discrete input |
Brand Name | Rockwell (Rockwell) |
Cat Num | 1756-IV32 |
Communication | Backplane (producer/consumer) |
Display | — |
Enclosure | None (open-style) |
Interface | Removable terminal block |
Mounting | Chassis slot |
Number Of Channels | 32 |
Standard | CE, UL, CSA, RCM |
Sub Brand | ControlLogix |
Type | Digital Input Module |
UNSPSC | — |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1756-TD003 (module specifications) and 1756-IN062 (DC digital I/O installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
The IV32 is chosen where many channels must be isolated from one another in a compact rack: multi-supplier skids, mixed-earthed circuits, and retrofit panels with little slot space.
Its 1.5...5 mA window suits modern low-current sensors and PLC-to-PLC handshake signals, not legacy devices that draw 10 mA per point.
Because isolation is per channel, screening practice changes: each channel is its own circuit electrically, so the field wiring should be documented per channel rather than per group.
Three bi-colour indicators plus the alphanumeric display cover almost every commissioning fault, so most problems are resolved at the panel without a laptop.
| Indicator | State | Meaning and first action |
| Check 2 | 1.5...5 mA per pin | Half the IV16's window. Field devices near 10 mA will not suit this module. |
| Check 3 | 175 mA backplane | For 32 isolated points — more per module than an IV16, less per point. |
| Check 4 | 10...30 V DC | Same window as the IV16; both stop at 30 V. |
| Check 5 | Density changes wiring practice | Thirty-two isolated pairs on one terminal block; screen and separate them per channel, not per group. |
Specifications per Rockwell publication 1756-IN062 (ControlLogix DC Digital I/O Modules installation instructions); module behaviour per 1756-UM058 and technical data 1756-TD002 and 1756-IN050.
The 16-point equivalent is 1756-IV16, with 1.5...10 mA per pin and group-level isolation.
The standard high-volume 32-point module is 1756-IB32: 5.5 mA per input, 120 mA backplane, group isolation.
The high-voltage isolated module is 1756-IH16I for 90...146 V DC circuits.
What is the 1756-IV32?
A 32-point DC input module, 10...30 V DC, 1.5...5 mA per pin, with input-to-input isolation.
What is the backplane current?
175 mA at 5.1 V DC and 2 mA at 24 V DC.
What isolation does it provide?
250 V continuous reinforced inputs-to-backplane and 250 V basic input-to-input.
How does it compare with the 1756-IV16?
Twice the points, half the per-pin current window, reinforced backplane isolation and input-to-input isolation instead of group isolation.
How does it compare with the 1756-IB32?
The IB32 is the volume module with group isolation at 120 mA backplane; the IV32 adds per-channel isolation at 175 mA.
What is the input voltage range?
10...30 V DC.
Is a terminal block included?
No — the removable terminal block is a separate item.
What documents cover it?
1756-IN062 for installation and specifications, 1756-TD002 for technical data and 1756-UM058 for the user manual.
Data sources. Technical values on this page come from Rockwell publications 1756-TD003 (ControlLogix Communication Modules Specifications), 1756-IN050 (1756 EtherNet/IP Communication Modules, installation instructions), 1756-UM004 (ControlLogix EtherNet/IP Network Devices User Manual) and the manufacturer's product page for 1756-IV32. Values re-checked 15 November 2026.