|
Product Details:
Payment & Shipping Terms:
|
The 1756-OA8 (also written 1756OA8) is the 8-point AC triac output module: 120/240 V AC at 50/60 Hz, 2 A pilot duty, backplane 200 mA at 5.1 V DC and 2 mA at 24 V DC, isolation 125 V continuous basic outputs-to-backplane with no isolation between individual outputs, and unfused at module level — the published fusing table lists the OA8D and OA8E as electronically fused per point, the OA16 as mechanically fused per group, and all other modules as not protected, which includes the OA8.
That point matters commercially as much as technically. The OA8 requires a fused interface module or external fusing for output protection, and the cost of one is part of the comparison against the OA8D and OA8E, which carry electronic fusing per point.
Motor-starter capability at 120 V AC/60 Hz is generous for eight points: 8 starters of size 0...1, size 2 and size 3, 8 of size 4 at 30 °C and 6 at 60 °C, and 5 of size 5 at 30 °C and 4 at 60 °C — the same size 4 and 5 capability as the OA16I, on eight points instead of sixteen.
The module belongs to the AC output family with the same published output features: scheduled outputs synchronised within 16.7 seconds to the Coordinated System Time, per-point fault state and program state, and electronic module keying.
1756-IB16 | 16 sinking inputs, 10...31.2 V DC 10 mA, backplane 100 mA, UPC 612598171293 | In stock |
1756-IB16D | 16 diagnostic inputs, 10...30 V DC 13 mA, backplane 150 mA | In stock |
1756-IB16I | 16 isolated inputs, 10...30 V DC 10 mA, backplane 135 mA | In stock |
1756-IB16IF | 16 fast peer-control inputs, 10...30 V DC 5 mA, backplane 275 mA | In stock |
1756-IB16ISOE | 16 sequence-of-events inputs, 10...55 V DC 5.1 mA, backplane 320 mA | In stock |
1756-IB32 | 32 sinking inputs, 10...31.2 V DC 5.5 mA, backplane 120 mA, UPC 612598171309 | In stock |
1756-IC16 | 16 inputs, 30...60 V DC, backplane per 1756-IN062 | In stock |
1756-IG16 | 16 TTL inputs, backplane per 1756-IN062 | In stock |
1756-IV16 | 16 inputs, 48 V DC, backplane per 1756-IN062 | In stock |
Application | Discrete output |
Brand Name | Rockwell (Rockwell) |
Cat Num | 1756-OA8 |
Communication | Backplane (producer/consumer) |
Display | — |
Enclosure | None (open-style) |
Interface | Removable terminal block |
Mounting | Chassis slot |
Number Of Channels | 8 |
Standard | CE, UL, CSA, RCM |
Sub Brand | ControlLogix |
Type | Digital Output Module |
UNSPSC | — |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1756-TD003 (module specifications) and 1756-IN062 (DC digital I/O installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
Eight AC outputs in one slot suits small machine sections: a valve bank, a set of contactor coils, or an indicator panel where sixteen points would be half-empty.
Because it reaches size 4 and 5 starters at reduced counts, it also serves as a compact high-capability output where only a few large starters are present.
Its lack of on-module fusing makes the interface decision part of the design: a fused IFM protects the outputs, and the OA8D or OA8E carry that protection inside the module.
Three bi-colour indicators plus the alphanumeric display cover almost every commissioning fault, so most problems are resolved at the panel without a laptop.
| Indicator | State | Meaning and first action |
| Check 2 | Eight points, size 4 and 5 capable | 8 size 4 starters at 30 °C, 6 at 60 °C; 5 size 5 at 30 °C, 4 at 60 °C. |
| Check 3 | 125 V isolation only | Outputs-to-backplane is 125 V basic on this module, against 250 V on the OA16 and OA16I. That difference matters at 240 V AC. |
| Check 4 | Cost comparison | Add the external fuse or fused interface module to the OA8 price before comparing it with the OA8D, which fuses per point. |
| Check 5 | Fault state configuration | Per-point fault and program states are set in the project; default off. |
Specifications per Rockwell publication 1756-IN062 (ControlLogix DC Digital I/O Modules installation instructions); module behaviour per 1756-UM058 and technical data 1756-TD002 and 1756-IN050.
The diagnostic 8-point module is 1756-OA8D, electronically fused per point with a 10 mA minimum load requirement.
The electronically fused 8-point module is 1756-OA8E.
The 16-point group-fused module is 1756-OA16, and the 16-point isolated module is 1756-OA16I.
What is the 1756-OA8?
An 8-point AC triac output module, 120/240 V AC at 2 A pilot duty, backplane 200 mA at 5.1 V DC, unfused at module level.
Is it fused?
No. Rockwell's fusing table lists only the OA8D and OA8E as electronically fused per point and the OA16 as mechanically fused per group; the OA8 is not protected, and a fused interface module is recommended.
How many size 5 starters can it drive?
5 at 30 °C and 4 at 60 °C at 120 V AC/60 Hz.
How many size 0...3 starters?
8 starters of each size from 0 to 3 at 120 V AC/60 Hz.
What output voltage range?
120/240 V AC at 50/60 Hz, rated 2 A pilot duty per point.
What is the backplane current?
200 mA at 5.1 V DC and 2 mA at 24 V DC.
How does it differ from the OA8D?
The OA8D is the diagnostic version, electronically fused per point, and requires a minimum load of 10 mA to sense its outputs.
Does it have scheduled outputs?
Yes — the AC output family synchronises scheduled outputs within 16.7 seconds to the Coordinated System Time.
What documents cover it?
1756-IN064 for installation and 1756-UM058 for the module manual and the starter tables.
Data sources. Technical values on this page come from Rockwell publications 1756-TD003 (ControlLogix Communication Modules Specifications), 1756-IN050 (1756 EtherNet/IP Communication Modules, installation instructions), 1756-UM004 (ControlLogix EtherNet/IP Network Devices User Manual) and the manufacturer's product page for 1756-OA8. Values re-checked 15 November 2026.