|
Product Details:
Payment & Shipping Terms:
|
The 1794-ASBLT Series D is the Remote I/O adapter for FLEX I/O islands that talk to a PLC-5/15 or PLC-5/25 over the RIO link at 57.6 kbps — the only rate those processors support.
It ships in standard addressing mode and is interchangeable with the 1794-ASB Series A and B adapters in that mode, which is what makes it a practical field replacement for older adapters.
| 1794-AENT | EtherNet/IP adapter, single RJ45, 8 modules | IN STOCK |
| 1794-AENTR | dual-port EtherNet/IP adapter, redundancy capable | IN STOCK |
| 1794-AENTRXT | dual-port EtherNet/IP adapter, extended temperature | IN STOCK |
| 1794-ACN15 | ControlNet adapter, 15 Mbps, 8 modules | IN STOCK |
| 1794-ACN15K | ControlNet adapter, 15 Mbps, conformal coated | IN STOCK |
| 1794-ACNR | ControlNet adapter with redundant media | IN STOCK |
| 1794-ACNR15XT | ControlNet adapter, redundant media, extended temperature | IN STOCK |
| 1794-ACN | ControlNet adapter module, 8 modules | IN STOCK |
| 1794-ADN | DeviceNet adapter, 8 modules | IN STOCK |
| 1794-ADNK | DeviceNet adapter, conformal coated | IN STOCK |
| 1794-APB | Profibus DP adapter, 8 modules | IN STOCK |
| 1794-APBDPV1 | Profibus DP-V1 adapter, 8 modules | IN STOCK |
| 1794-ASB | Remote I/O adapter, 8 modules | IN STOCK |
| 1794-ASB2 | Remote I/O adapter, extended functionality | IN STOCK |
| 1794-ASBLT | Remote I/O adapter with built-in termination | IN STOCK |
Application |
FLEX I/O Remote I/O adapter |
Cat Num |
1794-ASBLT Series D |
Brand Name |
Rockwell |
I/O module capacity |
8 modules |
Input voltage |
19.2...31.2V DC, 24V DC nom |
Inrush current |
23 A at 24V DC for 2 ms |
Communication rate |
57.6, 115.2, 230 kbps |
Current draw |
330 mA at 24V DC, 450 mA max |
Flexbus output |
640 mA max |
Isolation |
50V continuous, tested 850V DC for 1 s |
Operating temperature |
0...55 deg C |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1794-DU001 (module specifications) and 1794-SG002 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
57.6, 115.2 or 230 kbps, with PLC-5/15 and PLC-5/25 limited to 57.6 kbps.
A PRL communication reset button sits on the faceplate for link resets.
Addressing mode set by switches S1 and S2 behind an access door: standard, compact or complementary.
Belden 9463 cable with plug-in connector 942029-03, and the link terminated here if this is the last adapter.
19.2...31.2V DC at 24V nominal, 330 mA typical and 450 mA maximum.
23 A inrush for 2 ms per adapter, a requirement on the 24V supply rather than the adapter.
640 mA Flexbus output for the modules behind it.
4.6 W dissipation at 31.2V DC and 1.7 BTU/hr, low heat for a crowded enclosure.
50V continuous, tested at 850V DC for 1 s between user power and the Flexbus.
87 x 69 x 69 mm, the narrow Remote I/O envelope.
0...55 deg C operating and -40...85 deg C storage.
4 kV contact ESD and 10 V/m radiated immunity, CISPR 11 Group 1 Class A emissions.
In standard addressing mode it replaces 1794-ASB Series A and B.
For PLC-5/15 and PLC-5/25 it replaces only the 1794-ASB Series D.
In compact mode, 32-point modules appear as 8 or 16-point modules to the processor, which matters when programming block transfers.
Switches differ from earlier versions, so each switch has to be identified before setting.
Legacy RIO islands on PLC-5 systems.
Panels keeping Remote I/O rather than migrating to EtherNet/IP.
Not for ControlNet or DeviceNet.
Not 8 modules beyond; capacity is 8.
What communication rates does the 1794-ASBLT support?
57.6, 115.2 and 230 kbps; PLC-5/15 and PLC-5/25 only support 57.6 kbps.
Which adapters does it replace?
1794-ASB Series A and B in standard addressing mode, and 1794-ASB Series D for PLC-5/15 and PLC-5/25.
How many modules can it carry?
8 FLEX I/O modules.
What is the inrush current?
23 A at 24V DC for 2 ms.
What is the isolation rating?
50V continuous, tested at 850V DC for 1 s.
What cable is specified?
Belden 9463 with connector part number 942029-03.