|
Product Details:
Payment & Shipping Terms:
|
The 1756-IA16I (also written 1756IA16I) is the individually isolated 16-point AC input module: 120 V AC at 50/60 Hz, 15 mA per point, backplane 125 mA at 5.1 V DC and 3 mA at 24 V DC, isolation 125 V continuous basic, inputs to backplane and input to input (1756-IN064).
Read the isolation line carefully, because it is where this module differs from what its name suggests. Every input is isolated from every other input — sixteen separate barriers — but the barrier voltage is 125 V, the lowest in the AC input family, not the 250 V of the IA16 or the IM16I. It is a 120 V module with point-to-point isolation, not a general-purpose isolated input.
The individual barriers are what make it useful: each point can have its own return, its own circuit, or its own reference, and a fault on one field circuit cannot reach the others. That is the practical meaning of input-to-input isolation and the reason this module exists alongside the cheaper group-isolated IA16.
At 15 mA per point and 125 mA on the 5.1 V rail, it costs more backplane current than the IA16 for the same sixteen channels. The premium is the isolation, and the arithmetic is straightforward: sixteen isolated barriers in one slot instead of two.
1756-IB16 | 16 sinking inputs, 10...31.2 V DC 10 mA, backplane 100 mA, UPC 612598171293 | In stock |
1756-IB16D | 16 diagnostic inputs, 10...30 V DC 13 mA, backplane 150 mA | In stock |
1756-IB16I | 16 isolated inputs, 10...30 V DC 10 mA, backplane 135 mA | In stock |
1756-IB16IF | 16 fast peer-control inputs, 10...30 V DC 5 mA, backplane 275 mA | In stock |
1756-IB16ISOE | 16 sequence-of-events inputs, 10...55 V DC 5.1 mA, backplane 320 mA | In stock |
1756-IB32 | 32 sinking inputs, 10...31.2 V DC 5.5 mA, backplane 120 mA, UPC 612598171309 | In stock |
1756-IC16 | 16 inputs, 30...60 V DC, backplane per 1756-IN062 | In stock |
1756-IG16 | 16 TTL inputs, backplane per 1756-IN062 | In stock |
1756-IV16 | 16 inputs, 48 V DC, backplane per 1756-IN062 | In stock |
Application | Discrete input |
Brand Name | Rockwell (Rockwell) |
Cat Num | 1756-IA16I |
Communication | Backplane (producer/consumer) |
Display | — |
Enclosure | None (open-style) |
Interface | Removable terminal block |
Mounting | Chassis slot |
Number Of Channels | 16 |
Standard | CE, UL, CSA, RCM |
Sub Brand | ControlLogix |
Type | Digital Input Module |
UNSPSC | — |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1756-TD003 (module specifications) and 1756-IN062 (DC digital I/O installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
This is the module for a panel where the field circuits genuinely differ: several 120 V sources, more than one return, or signals from equipment supplied by different transformers that must not be tied together at the I/O card.
It also suits troubleshooting-driven designs. With point-to-point isolation a single field fault cannot pull a group of inputs to a false state, so a faulted sensor shows up as one bad reading rather than as a bank of them.
Where all signals come from one 120 V feed, the IA16 is cheaper and draws less backplane current, and the group isolation is sufficient. The IA16I is bought for the topology, not for the count.
Three bi-colour indicators plus the alphanumeric display cover almost every commissioning fault, so most problems are resolved at the panel without a laptop.
| Indicator | State | Meaning and first action |
| Check 2 | Sixteen separate returns | Each input stands alone. Use that: separate circuits, separate sensors, a fault contained to one point. |
| Check 3 | 15 mA per point | Higher than the IA16's 13 mA and the highest of the 120 V group apart from the IA8D's 16 mA — more leakage immunity per point. |
| Check 4 | 125 mA backplane | A quarter more 5.1 V DC current than the group-isolated IA16 for the same channel count. |
| Check 5 | T4A temperature code | 60 °C maximum surrounding air, same as the rest of the 120 V AC inputs. |
Specifications per Rockwell publication 1756-IN062 (ControlLogix DC Digital I/O Modules installation instructions); module behaviour per 1756-UM058 and technical data 1756-TD002 and 1756-IN050.
For group-isolated 16-point 120 V AC inputs at lower backplane current, use 1756-IA16.
For 240 V AC with input-to-input isolation at 250 V, use 1756-IM16I.
For 32 points of 74...132 V AC with group isolation, use 1756-IA32.
What is the 1756-IA16I?
A 16-point 120 V AC input module with each input isolated from the others, 15 mA per point, backplane 125 mA at 5.1 V DC and 3 mA at 24 V DC.
What is the isolation rating?
125 V continuous basic, both inputs to backplane and input to input, as published in 1756-IN064.
Why only 125 V if every point is isolated?
The published barrier for this module is 125 V. The 250 V input-to-input rating belongs to the 240 V IM16I, which is a different module.
Can I mix different 120 V sources on one module?
Yes — that is the point of input-to-input isolation. Each point has its own barrier to the backplane and to its neighbours.
How much current does each input draw?
15 mA at 120 V AC.
How does its backplane current compare with the IA16?
125 mA against 100 mA at 5.1 V DC, for the same sixteen channels; the difference is the sixteen individual barriers.
What is the maximum ambient temperature?
60 °C surrounding air, temperature code T4A.
What wire size does the terminal block accept?
0.33...2.1 mm² (22...14 AWG) copper rated 90 °C or better, 1.2 mm maximum insulation.
Which document should I quote?
1756-IN064 for the installation and ratings table.
Data sources. Technical values on this page come from Rockwell publications 1756-TD003 (ControlLogix Communication Modules Specifications), 1756-IN050 (1756 EtherNet/IP Communication Modules, installation instructions), 1756-UM004 (ControlLogix EtherNet/IP Network Devices User Manual) and the manufacturer's product page for 1756-IA16I. Values re-checked 15 November 2026.