|
Product Details:
Payment & Shipping Terms:
|
The 1794-TB3GS is the spring clamp version of the grounded base: 36 I/O, 2 common, 2 +V and 10 chassis ground terminals.
Ten grounding terminals are what an analog module needs — one per channel pair for a shield, rather than a shared return that lets channel noise couple.
| 1794-TB2 | 16-terminal cage clamp base, 2-wire, up to 132V AC | IN STOCK |
| 1794-TB3 | 16-terminal cage clamp base, 3-wire devices | IN STOCK |
| 1794-TB3S | 16-terminal spring clamp base, 3-wire devices | IN STOCK |
| 1794-TB32 | 32-terminal cage clamp base for 32-point modules | IN STOCK |
| 1794-TB32S | 32-terminal spring clamp base for 32-point modules | IN STOCK |
| 1794-TB3T | temperature base with two cold junction compensation sets | IN STOCK |
| 1794-TB3TS | spring clamp temperature base with CJC sets | IN STOCK |
| 1794-TB3G | grounded screw clamp base, 36 I/O, 10 chassis ground | IN STOCK |
| 1794-TB3GS | grounded spring clamp base, 36 I/O, 10 chassis ground | IN STOCK |
| 1794-TBKD | cage clamp base with 16 knife disconnects | IN STOCK |
| 1794-TBN | NEMA-style screw clamp base, up to 264V AC/DC | IN STOCK |
| 1794-TBNF | fused NEMA-style base, eight 5 x 20 mm fuses | IN STOCK |
| 1794-TB37DS | 37-pin D-shell termination for digital and analog modules | IN STOCK |
| 1794-TB62DS | 62-pin D-shell termination for digital and analog modules | IN STOCK |
Application |
FLEX I/O grounded terminal base for analog modules |
Cat Num |
1794-TB3GS |
Brand Name |
Rockwell |
Termination |
Grounded spring clamp, 36 I/O, 2 common, 2 +V, 10 chassis ground |
Wire size |
0.34...3.3 mm2 (22...12 AWG), 75 deg C or greater |
Current capacity |
10 A maximum |
Wiring category |
2 |
Dimensions |
94 x 94 x 69 mm |
Operating temperature |
-20...70 deg C |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1794-DU001 (module specifications) and 1794-SG002 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
36 I/O terminals, 2 common, 2 +V and 10 chassis ground, the pattern the guide assigns to grounded analog bases.
Spring clamp termination with 22...12 AWG wire and a 10 A rating.
Two common and two +V terminals only, so this base is not a 3-wire digital base despite the terminal count.
94 x 94 x 69 mm footprint, -20...70 deg C.
Individual grounding per channel pair is the reason the base exists; analog shields land close to their own signal.
The rail itself must be zinc-plated, yellow-chromated steel for the chassis path to work.
Aluminium or plastic rail breaks that path, causing intermittent grounding the guide warns about.
Panel mount uses star-washer screws through the base mounting holes when no rail is available.
Analog input and output modules with shielded field wiring.
Noise-sensitive loops — 4...20 mA transmitters, load cells, thermocouples on the IR8.
Not a digital base; 2 common and 2 +V will not wire 16 discrete points comfortably.
Not the temperature base; CJC sets live on the 1794-TB3TS.
35 x 7.5 mm DIN rail with 25 mm air space around the system.
1794-NM1 panel kit and 1492-EA35 rail locks where appropriate.
Bases plug together to form the backplane with one end cap per system.
Vertical mounting is permitted on the standard rail.
Analog islands with shielded cable, spring terminated.
Panels that standardise on spring clamps across the whole rail.
Not for discrete I/O; the 1794-TB32S carries 32 points with 8 common.
Not the coated version; the 1794-TB3GSK adds the K coating.
How many chassis ground terminals has the 1794-TB3GS?
10, for individual grounding of analog channels.
Is it spring or screw termination?
Spring clamp, the spring version of the 1794-TB3G.
How many I/O terminals does it have?
36 I/O, with 2 common and 2 +V.
What is the current capacity?
10 A maximum.
What rail does the grounding require?
Zinc-plated, yellow-chromated steel DIN rail, 35 x 7.5 mm.
What is the operating temperature?
-20...70 deg C.