|
Product Details:
Payment & Shipping Terms:
|
2080-REMLCD is a Remote LCD display in the Bulletin 2080 Micro800 plug-in family. It puts a 192 by 64 pixel display and a membrane keypad on the panel door while the controller stays inside.
A plug-in module snaps into a slot on the controller itself, so the I/O count grows without adding a DIN rail footprint or an expansion bus module.
| 2080-IF2 | 2-channel analog input plug-in | IN STOCK |
| 2080-IF4 | 4-channel analog input plug-in | IN STOCK |
| 2080-OF2 | 2-channel analog output plug-in | IN STOCK |
| 2080-TC2 | 2-channel thermocouple plug-in | IN STOCK |
| 2080-RTD2 | 2-channel RTD plug-in | IN STOCK |
| 2080-TRIMPOT6 | 6-channel trimpot analog input | IN STOCK |
| 2080-OB4 | 4-point DC source output plug-in | IN STOCK |
| 2080-OV4 | 4-point DC sink output plug-in | IN STOCK |
| 2080-OW4I | 4-point relay output plug-in | IN STOCK |
| 2080-IQ4OV4 | 8-point combo, 4 in / 4 out sink | IN STOCK |
| 2080-IQ4OB4 | 8-point combo, 4 in / 4 out source | IN STOCK |
| 2080-SERIALISOL | isolated RS-232/RS-485 serial plug-in | IN STOCK |
| 2080-MOT-HSC | high-speed counter plug-in | IN STOCK |
| 2080-MEMBAK-RTC | memory backup with real-time clock | IN STOCK |
| 2080-USBADAPTER | Micro810 USB adapter | IN STOCK |
| 2080-LCD | Micro810 LCD display with keypad | IN STOCK |
| 2080-REMLCD | Micro820 remote LCD display | IN STOCK |
| 2080-PS120-240VAC | 120/240 V AC to 24 V DC power supply | IN STOCK |
Catalog number |
2080-REMLCD |
Product type |
Remote LCD display |
Channels / points |
192 x 64 pixel display |
Signal |
Operator display and parameter entry |
Isolation |
Not applicable |
Resolution |
192 x 64 pixels |
Controller compatibility |
Micro820 only |
Dimensions, H x W x D |
97 x 130 x 35.5 mm |
Temperature rating |
0 to 50 C (32 to 122 F) |
Lifecycle status |
Active |
UPC |
885630885414 |
Country of origin |
India |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 2080-IN010 (module specifications) and Rockwell literature library (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
2080-REMLCD is a Remote LCD display in the Bulletin 2080 Micro800 plug-in family. It puts a 192 by 64 pixel display and a membrane keypad on the panel door while the controller stays inside.
A plug-in module snaps into a slot on the controller itself, so the I/O count grows without adding a DIN rail footprint or an expansion bus module.
Channel count and signal type are fixed by the catalog number: 192 x 64 pixel display, Operator display and parameter entry.
Micro820 only
The module is configured in Connected Components Workbench, not by a hardware switch, so the project file has to match the module that is physically fitted.
Micro810 controllers have no plug-in slots at all; the Micro810 accessories take the USB or display port instead.
Input supply is 12 or 24 V DC, drawing 90 mA at 12 V and 60 mA at 24 V, with 1.5 W maximum consumption. The backlight is a three-colour RGB LED rated 25,000 hours at 25 C.
Every plug-in in this family is rated for the same panel environment, and the terminal block is the part that decides whether a swap is quick or not.
Isolation is Not applicable. Where that matters, it is stated per model rather than assumed for the whole family.
Rockwell lists this catalog number as Active.
Dimensions are 97 x 130 x 35.5 mm, rated ambient 0 to 50 C (32 to 122 F).
UPC is 885630885414, country of origin India.
A used plug-in is only worth fitting if the terminal block and the retaining clips are intact; the clips are what holds the module against vibration.
Match the catalog number exactly. The family contains pairs that differ only in sink versus source output or isolation, and the front label is the only reliable identifier once the box is gone.
Rockwell states that the module is for the Micro820 only, so it will not work on a Micro830 or Micro850.
What does 2080-REMLCD do?
Remote LCD display: 192 x 64 pixel display, Operator display and parameter entry.
Which controllers accept 2080-REMLCD?
Micro820 only
What is the resolution of 2080-REMLCD?
192 x 64 pixels.
What are the dimensions of 2080-REMLCD?
97 x 130 x 35.5 mm, rated 0 to 50 C (32 to 122 F).
Is 2080-REMLCD still available from Rockwell?
Rockwell lists it as Active.