|
Product Details:
Payment & Shipping Terms:
|
2080-LCD is a LCD display and keypad in the Bulletin 2080 Micro800 plug-in family. The Micro810 can be configured from this display without programming software, which is the point of the module: Rockwell describes the 12-point Micro810 as configurable through the embedded LCD.
A plug-in module snaps into a slot on the controller itself, so the I/O count grows without adding a DIN rail footprint or an expansion bus module.
| 2080-IF2 | 2-channel analog input plug-in | IN STOCK |
| 2080-IF4 | 4-channel analog input plug-in | IN STOCK |
| 2080-OF2 | 2-channel analog output plug-in | IN STOCK |
| 2080-TC2 | 2-channel thermocouple plug-in | IN STOCK |
| 2080-RTD2 | 2-channel RTD plug-in | IN STOCK |
| 2080-TRIMPOT6 | 6-channel trimpot analog input | IN STOCK |
| 2080-OB4 | 4-point DC source output plug-in | IN STOCK |
| 2080-OV4 | 4-point DC sink output plug-in | IN STOCK |
| 2080-OW4I | 4-point relay output plug-in | IN STOCK |
| 2080-IQ4OV4 | 8-point combo, 4 in / 4 out sink | IN STOCK |
| 2080-IQ4OB4 | 8-point combo, 4 in / 4 out source | IN STOCK |
| 2080-SERIALISOL | isolated RS-232/RS-485 serial plug-in | IN STOCK |
| 2080-MOT-HSC | high-speed counter plug-in | IN STOCK |
| 2080-MEMBAK-RTC | memory backup with real-time clock | IN STOCK |
| 2080-USBADAPTER | Micro810 USB adapter | IN STOCK |
| 2080-LCD | Micro810 LCD display with keypad | IN STOCK |
| 2080-REMLCD | Micro820 remote LCD display | IN STOCK |
| 2080-PS120-240VAC | 120/240 V AC to 24 V DC power supply | IN STOCK |
Catalog number |
2080-LCD |
Product type |
LCD display and keypad |
Channels / points |
1.5 in display |
Signal |
Operator display and parameter entry |
Isolation |
Not applicable |
Resolution |
Not published |
Controller compatibility |
Micro810 controllers; also usable as a backup memory module |
Dimensions, H x W x D |
Per 2080-WD009 |
Temperature rating |
Per 2080-UM001 |
Lifecycle status |
Active |
UPC |
Not published |
Country of origin |
Not published |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 2080-WD009 (module specifications) and Rockwell literature library (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
2080-LCD is a LCD display and keypad in the Bulletin 2080 Micro800 plug-in family. The Micro810 can be configured from this display without programming software, which is the point of the module: Rockwell describes the 12-point Micro810 as configurable through the embedded LCD.
A plug-in module snaps into a slot on the controller itself, so the I/O count grows without adding a DIN rail footprint or an expansion bus module.
Channel count and signal type are fixed by the catalog number: 1.5 in display, Operator display and parameter entry.
Micro810 controllers; also usable as a backup memory module
The module is configured in Connected Components Workbench, not by a hardware switch, so the project file has to match the module that is physically fitted.
Micro810 controllers have no plug-in slots at all; the Micro810 accessories take the USB or display port instead.
Rockwell also notes that the LCD module can be used as a backup memory module on the Micro810, so the same part serves two purposes.
Every plug-in in this family is rated for the same panel environment, and the terminal block is the part that decides whether a swap is quick or not.
Isolation is Not applicable. Where that matters, it is stated per model rather than assumed for the whole family.
Rockwell lists this catalog number as Active.
Dimensions are Per 2080-WD009, rated ambient Per 2080-UM001.
UPC is Not published, country of origin Not published.
A used plug-in is only worth fitting if the terminal block and the retaining clips are intact; the clips are what holds the module against vibration.
Match the catalog number exactly. The family contains pairs that differ only in sink versus source output or isolation, and the front label is the only reliable identifier once the box is gone.
The display is the only operator interface on a Micro810 panel that has no HMI, so a failed module takes the setpoints with it.
What does 2080-LCD do?
LCD display and keypad: 1.5 in display, Operator display and parameter entry.
Which controllers accept 2080-LCD?
Micro810 controllers; also usable as a backup memory module
What is the resolution of 2080-LCD?
Not published.
What are the dimensions of 2080-LCD?
Per 2080-WD009, rated Per 2080-UM001.
Is 2080-LCD still available from Rockwell?
Rockwell lists it as Active.