|
Product Details:
Payment & Shipping Terms:
|
The 2711P-RTFC is Mounting levers for the PanelView Plus range: Mounting Levers for PanelView Plus 400 and 600 (Quantity 8).
It belongs to the same 700...1500 accessory family as the logic, display and communication spares, and it is ordered by this catalog number alone.
| 2711P-RTMC | Mounting Clips for PanelView Plus 700-1500 and PanelView Plus CE (Quantity 8) | IN STOCK |
| 2711P-RTFC | Mounting Levers for PanelView Plus 400 and 600 (Quantity 8) | IN STOCK |
Application |
Mounting Levers for PanelView Plus 400 and 600 (Quantity 8) |
Cat Num |
2711P-RTFC |
Brand Name |
Rockwell |
Product Type |
Mounting levers |
Fits |
400 and 600 terminals |
Pack Quantity |
8 |
Lifecycle |
Active in the Rockwell catalog |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 2711P-UM001 (module specifications) and 2711P-UM001 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
Official Rockwell description: Mounting Levers for PanelView Plus 400 and 600 (Quantity 8).
The clips and levers are the parts that hold the terminal against the panel; they are supplied in packs of eight, which is the quantity a 400/600 or a 700...1500 terminal needs.
Fits: 400 and 600 terminals.
Pack Quantity: 8.
Rockwell Automation lists 2711P-RTFC as active, so it is orderable as an ordinary spare part.
Match the size and the input style of the front before ordering.
Mounting levers belong to the 400 and 600 terminals, mounting clips to the 700...1500 terminals; the two shapes are not interchangeable.
These two parts are still active in the Rockwell catalog, unlike the rest of this accessory range.
Every page in this family carries the catalog number, the front it fits and the published discontinuation date; nothing else is quoted as specification.
A photograph of the old part beside the terminal nameplate settles the match faster than any description, because accessory numbering follows the front, not the electronics.
For overlays and bezels, order the part before the glass is scratched: a scratched front on a discontinued terminal cannot be replaced by polishing.
The table at the top lists every catalog number of this part family that this site carries; the row in red is the item on this page.
Within one family the catalog numbers differ by screen size and by input style, and both must be checked against the terminal nameplate.
What is 2711P-RTFC?
Mounting Levers for PanelView Plus 400 and 600 (Quantity 8).
Which terminal does 2711P-RTFC fit?
400 and 600 terminals.
Is 2711P-RTFC still available?
It is listed as active in the Rockwell catalog.
Is 2711P-RTFC a display module or a front accessory?
A front accessory: it changes how the front looks or fits, and it never contains the display or the logic module.
What settles the match for 2711P-RTFC?
The screen size plus the input style on the terminal nameplate; the accessory numbering follows the front, not the electronics.