|
Product Details:
Payment & Shipping Terms:
|
1761-HHM-K08 is the 8 KB Handheld Memory Module: 8 KB memory module for the MicroLogix 1000 hand-held programmer.
The Rockwell product page for this catalog number is no longer published, so capacity and environment values are not restated here.
The hand-held route existed because a MicroLogix 1000 panel often had no room for a laptop and no network to reach. A pocket terminal with a memory module was enough to load a program and read a fault.
| 1761-HHP-B30 | Hand-Held Programmer | IN STOCK |
| 1761-HHM-K64 | 64 KB Handheld Memory Module | IN STOCK |
| 1761-HHM-K08 | 8 KB Handheld Memory Module | IN STOCK |
Catalog number |
1761-HHM-K08 |
Description |
8 KB memory module for the MicroLogix 1000 hand-held programmer |
Used with |
MicroLogix 1000 controllers and the 1761 hand-held programmer |
Lifecycle status |
Not published |
Replacement category |
Not published |
UPC |
Not published |
Temperature rating |
0…55 °C where Rockwell publishes it |
Country of origin |
Singapore on the 64 KB module |
Publication |
1761-UM003 |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1761-UM003 (module specifications) and 1761-SG001 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
8 KB memory module for the MicroLogix 1000 hand-held programmer.
The Rockwell product page for this catalog number is no longer published, so capacity and environment values are not restated here.
The programmer and the memory modules were sold as a set. A program was prepared on a PC, copied to the module, and the module carried into the panel — the module, not the terminal, was the thing that travelled.
Connect the terminal to the controller's RS-232 programming port with the 1761-CBL-HM02 cable, select the memory module as the source, and transfer. No software, no driver, no address to set.
For a maintenance visit the sequence was: read the fault, read the program revision, load the archived program from the module, restart. Everything needed fit in a coat pocket, which is why the parts survived in tool bags long after the platform was replaced.
Rockwell publishes 64 KB of memory for the 1761-HHM-K64 module, with a 0…55 °C temperature rating and Singapore as the country of origin. The 8 KB module carries the same function at a smaller capacity; its current product page is no longer published, so no figure is restated for it here.
Memory modules are static parts. They do not lose content with age the way a battery-backed RAM does, but they are sensitive to handling — a module stored loose in a drawer with other boards is a module at risk.
Both the terminal and the modules are out of production, so what is traded is new old stock and pulls. Check the module capacity against the program size before buying: a 1 KB program fits an 8 KB module, but a heavily loaded 1761-L32BWA program with a large data table may not.
The terminal's keypad and display are the parts that fail with use. A unit with a clean display and no missing key legends is the better buy even at a higher price.
1761-HHM-K08 has no published lifecycle record on the current Rockwell product page.
There is no like-for-like successor. The function moved to PC software: RSLogix 500 over a 1761-CBL-PM02 cable, later Connected Components Workbench on the Micro800 platform.
What is 1761-HHM-K08?
8 KB memory module for the MicroLogix 1000 hand-held programmer.
What is 1761-HHM-K08 used with?
MicroLogix 1000 controllers and the 1761 hand-held programmer.
What cable connects the hand-held programmer to a controller?
1761-CBL-HM02.
Is 1761-HHM-K08 still available from Rockwell?
No. No current product page is published.
What replaced the hand-held programmer?
PC software: RSLogix 500 over 1761-CBL-PM02, then Micro800 with CCW.