|
Product Details:
Payment & Shipping Terms:
|
1761-CBL-HM02 is the cable that connects MicroLogix 1000 controller to the hand-held programmer.
Unlike the controllers and the communication adaptors of the 1761 family, this cable is still on the Rockwell catalogue as Active Mature, with a published lead time. That makes it the one part of a MicroLogix 1000 panel that can still be bought new when a connector goes missing.
| 1761-CBL-PM02 | Cable: MicroLogix 1000 controller to a personal computer | IN STOCK |
| 1761-CBL-AP00 | Cable: MicroLogix 1000 controller to port 1 of the adaptor chain | IN STOCK |
| 1761-CBL-AM00 | Cable: MicroLogix 1000 controller to port 2 of the adaptor chain | IN STOCK |
| 1761-CBL-AS09 | Cable: SLC 5/01, 5/02 and 5/03 RJ45 port to port 3 | IN STOCK |
| 1761-CBL-AS03 | Cable: SLC 5/01, 5/02 and 5/03 RJ45 port to port 3 | IN STOCK |
| 1761-CBL-AC00 | Cable: 9-pin port of a 1761-NET-AIC to a 9-pin port | IN STOCK |
| 1761-CBL-HM02 | Cable: MicroLogix 1000 controller to the hand-held programmer | IN STOCK |
Catalog number |
1761-CBL-HM02 |
Description |
MicroLogix cable: MicroLogix 1000 controller to the hand-held programmer |
Class |
Power cable |
Lifecycle status |
Active Mature |
UPC |
662468489690 |
Estimated lead time |
5 days |
Country of origin |
China |
Warranty |
1 year standard |
Publication |
1761-UM003 |
Attribute values above are reproduced from the manufacturer's product data. For the authoritative technical record see Rockwell publications 1761-UM003 (module specifications) and 1761-SG001 (installation instructions). Certification details, with certificate and file numbers, are listed in the FAQ below.
Use: MicroLogix 1000 controller to the hand-held programmer.
The MicroLogix 1000 programming port is an 8-pin mini DIN carrying RS-232. The cable is the physical translation between that connector and the 9-pin port on the other end; nothing in the controller changes because of it.
A generic serial cable will plug in and may even transfer data, but the pin assignment on a mini DIN programming port is not the standard 9-pin null-modem map. A wrong cable is the usual reason a controller refuses to go online, and it is also the usual reason a port is damaged when a cable is forced into the socket.
Keep the correct cable with the panel. For a machine that is serviced once a year, a missing cable costs more in downtime than the cable costs to keep.
Cable length is a fixed part of the catalog number and is not chosen at order time. The controller dimensions printed for the family already include a note to add about 13 mm when a 1761-CBL-PM02 or 1761-CBL-HM02 connector is plugged in, which is the clearance needed inside a cabinet door.
Route the cable so the connector is not carrying the weight of the run. The mini DIN shell is small and the strain ends up on the controller socket.
Rockwell lists an estimated lead time of 5 days for this catalog number, with China as the country of origin and a one year standard warranty.
Lead times on these accessories move. A 51 day item is effectively a project part, not a spare, so the panel that depends on it should carry one on the shelf.
The cable is the cheapest item in the MicroLogix 1000 spares list and the one most often lost. Alongside a controller spare and a communication adaptor, it is what lets an engineer get online without waiting for a delivery.
Because the part is still active, a cable bought today is a current production item rather than new old stock of unknown storage history.
What does 1761-CBL-HM02 connect?
MicroLogix 1000 controller to the hand-held programmer.
Is 1761-CBL-HM02 still available from Rockwell?
Yes. It is listed as Active Mature, with an estimated lead time of 5 days.
Where is 1761-CBL-HM02 made?
China, per the Rockwell product page.
Does 1761-CBL-HM02 have a UPC?
662468489690 on the Rockwell product page.
Can a standard serial cable replace 1761-CBL-HM02?
No. The programming port uses an 8-pin mini DIN with a non-standard pin map; a generic cable is the usual cause of a controller that will not go online.